You have no items in your shopping cart.

You have no items to compare.

NOCTUA NA-FK1 second fan kit

More Views

NOCTUA NA-FK1 second fan kit

Product code: NA-FK1

Availability: In stock

720 THB
  • Upgrades the NH-U12S redux to a push/pull dual-fan configuration for improved performance or lower noise levels when running both fans at lower speed
  • Can reduce temperatures by 1-3°C, especially on higher heat-loads such as during turbo use, on overclocked systems or higher TDP processors
  • Second high-quality NF-P12 redux-1700 PWM fan supports automatic speed control via the motherboard, can provide massive airflow at load and run whisper-quiet at idle
  • Low-Noise Adaptors allow the maximum fan speed to be reduced from 1700 to 1300rpm for near-silent operation
  • Includes 1x NF-P12 redux-1700 PWM fan, 4 anti-vibration pads, 1 pair of fan mounting clips, 1x 4-pin PWM y-cable and 2x Low-Noise Adaptors

Product Description

fk1

The NA-FK1 is a second fan kit for the NH-U12S redux CPU cooler. Upgrading it to a push/pull-style dual-fan setup makes it possible to further improve cooling performance or to reduce noise levels by having two fans running at lower speeds. The kit includes a second NF-P12 redux-1700 PWM fan, anti-vibration pads, fan mounting clips, a 4-pin PWM y-cable as well as two Low-Noise Adaptors – everything you need to boost the efficiency of your NH-U12S redux!

fk1p12lna

Enhanced cooling performance

Adding a second NF-P12 redux-1700 PWM fan to the NH-U12S redux makes it possible to further improve cooling performance by around 1-3°C, depending on the application. As a rule of thumb, the gains are bigger the higher the heat load, so the NA-FK1 is particularly attractive for higher-end CPUs, extensive turbo use or overclocking.

NF-P12 redux-1700 PWM

The NF-P12 redux-1700 PWM fan included with the NA-FK1 is the same high-quality unit that comes pre-installed on the NH-U12S redux CPU cooler, so it’s a perfect match for a push/pull-style dual-fan setup. Supporting PWM for automatic speed control, it can run near silent most of the time and provide massive performance when necessary.

Lower noise levels and acoustic fine-tuning

The NA-FK1 can not only be used to enhance cooling performance, but also to lower noise levels: by letting both fans run at reduced speeds, either via automatic PWM control using the supplied y-cable or via the included Low-Noise Adaptors, the NH-U12S redux can operate more quietly while maintaining the same level of performance.

 
fk1
 

Specifications

Scope of delivery

 

  • NF-P12 redux-1700 PWM fan
  • 4x NA-AVP2 grey anti-vibration pads
  • Fan mounting clips (one pair)
  • NA-YC1 4-pin PWM y-cable
  • 2x NA-RC14 Low-Noise Adaptor (L.N.A)

 

Connector & pin-configuration

4-pin PWM

getAdditionalData()): ?>
Brands Noctua

You may also be interested in the following product(s)